30-AMP 12-VOLT/24-VOLT Digital Solar Power Charge Controller

Description
Reviews (0)

30-AMP 12-VOLT/24-VOLT Digital Solar Power Charge Controller

The CS-30 solar charge controller monitors the charge levels of your solar panels. The 30 amp charge controller allows you to convert your solar energy into 12 and 24-volt charging current. All solar power systems require a charge controller in order to complete the circuit.

FEATURED

Overload protection
Short circuit protection
Reverse discharge protection
Reverse polarity connection protection
Thunder protection
Low voltage protection
Overcharge protection
Battery stop and charge voltage HVD sets up
Charge and low voltage LCD sets up
Display the capability of the battery SOC
Loads and comeback setups
Intellectualized temperature compensation
Record and calculate the charged AH and display it on the LCD screen
Record and calculate the discharged AH and display it on the LCD screen
working temperature:-25C/+55C

SPECIFICATION

Model	CS-30
Rated Voltage	12V / 24V Automatic voltage recognition
Max Load current	30A
Input voltage range	12V~17V / 24V~34V
Length=1m Charge loop drop	< 0.25V
Length=1m Discharge loop drop	< 0.05V
Over voltage protection	17V / 34V
Full charge cut	13.7V / 27.4V(Default value, can be otherwise set)
Low voltage cut	10.5V~11V / 21V~22V(Default value, can be otherwise set)
Temperature compensation	-3mv/C/cell
No load loss	Less than or equal to 20mA
Max wire area	4mm2
Ambient temperature	-25C/+55C