No products in the cart.
2000 Watt 12V/24V Pure Sine Wave Inverter Charger
2000W 12V/24V/48V inverter/charger has a surge power that is 3 times of rating power, low-frequency type with transformer, UPS function, delivering reliable pure sine wave power for charging devices like a fridge, microwaves, TV, power tools, computers, LEDs, fans and other sensitive electronics. The inverter charger is widely applied in wind generators, solar power systems, houses, vehicles, ships, navigation, mobile electricity work and telecommunications device, launch station, and anywhere AC power is needed.
Features
- 2000 Watt continuous output power and 6000-watt peak power
- Pure sine wave output, is available for sensitive loads such as air conditioners, motor doors, etc.
- Fast and powerful inverter charger, 3-step progressive charging, 7 battery type selector
- High power factor
- Automatically transfer between battery and line mode
- Microprocessor control guarantees the high reliability
- Optional remote control function
- Multi-safety protection against overload, over temperature, overcharging, and low battery
- LCD digital display shows voltage, load, and battery info in real time
- Apply for split phase system, 2 live lines 1 neutral line, and voltage is 120V/240V
2000W Inverter/Charger Specification
| Model | LW2000 | ||||||
| Power | 2000 Watt | ||||||
| AC Input | Phase | Single Phase | |||||
| Waveform | Pure Sine Wave | ||||||
| Voltage* | 110V/120V AC or 220V/230V/240V AC | ||||||
| Acceptable Voltage | 95-126V AC or 194-253V AC±4% | ||||||
| Low Line Disconnect | 85V AC±4% or 184V AC±4% | ||||||
| Low Line Re-connect | 95V AC±4% or 194V AC±4% | ||||||
| High Line Disconnect | 136V AC±4% or 263V AC±4% | ||||||
| High Line Re-connect | 126V AC±4% or 253V AC±4% | ||||||
| Frequency | 50Hz: 41-54Hz or 60Hz: 51-64Hz (Auto detection) | ||||||
| AC Output | Phase & Waveform | Single Phase & Pure Sine Wave (bypass mode sync to input) | |||||
| Voltage* | 110V/120V AC or 220V/230V/240V AC 120V/240V AC split phase output Also Available: L1+L2=240V, L1+N=120V, L2+N=120V | ||||||
| Voltage Regulation | ±10%rms (bypass mode sync to input) | ||||||
| Frequency | 50Hz±0.3Hz or 60Hz±0.3Hz (bypass mode sync to input) | ||||||
| Peak Power | 3 times of rating power (6000W) | ||||||
| Short Circuit Protection | Yes, shutdown after 10ms | ||||||
| Power Factor | 0.9-1.0 | ||||||
| Outlet | Universal socket + wiring terminal block | ||||||
| DC Input | Battery Voltage* | 12V DC | 24V DC | 48V DC | |||
| Minimum Start Voltage | 10V DC | 20V DC | 40V DC | ||||
| Low Battery Alarm | 10.5±0.3V DC | 21±0.6V DC | 42±1.2V DC | ||||
| Low DC Input Shut-down | 10±0.3V DC | 20±0.6V DC | 40±1.2V DC | ||||
| High DC Voltage Alarm & Fault | 16±0.3V DC | 32±0.6V DC | 64±1.2V DC | ||||
| High DC Input Recovery | 15.5±0.3V DC | 31±0.6V DC | 62±1.2V DC | ||||
| Max Charger Current | 20A/35A/50A/75A/90A (According to the inverter model) | ||||||
| Efficiency | Line Mode | >96% | |||||
| Battery Mode | >85% | ||||||
| General | Power Saver | Load ≤ 25W (Enabled on “P/S auto” setting of Remote control) | |||||
| Audible Alarm | Sounding when the heat sink’s temperature is over 105℃ and shutdown after 30 seconds. | ||||||
| Over Load Protection | 110%＜load＜150%, beeps 0.5s every 1s, and Fault after 60s. Load＞150%, beeps 0.5s every 1s, and Fault after 20s. | ||||||
| Protections | Low battery, overcharging, over temperature, overload | ||||||
| Remote Control* | Wired remote control (5m) for power on/off | ||||||
| Indicators | LCD display | ||||||
| Operating Environment | 0-40℃, 0-90%℃ RH (non-condensing) | ||||||
| Protection Grade | IP20 | ||||||
| Audible Noise | <60dB | ||||||
| Net Weight | 19.5kg | ||||||
| Dimension (LxWxH) | 480×225×190mm | ||||||
Be the first to review “2000 Watt 12V/24V Pure Sine Wave Inverter Charger”
Related products
Sale!
Inverter Chargers
KSh261,000
Sale!
Inverter Chargers
KSh162,000
Inverter Chargers
Inverter Chargers
Inverter Chargers
Sale!
KSh541,000
Inverter Chargers
Reviews
There are no reviews yet.